Our range of Fluid Machine is encompassing of Conventional Fluid Machine and fluid control mechanics. Both are available within the different specifications & have different features. If we talk about the formulation of the Fluid Machine, it is made up of the finest quality raw material that ensures the durability of such machine. Fluid Machine is the best example of the superior quality & promptness. In addition, we shave set the benchmark for ourselves as renowned fluid machinery manufacturer and supplier in India.

FCC-01

INTRODUCTION

“EEE” Reynold's Apparatus consists of an acrylic tube with one end having bell mouth entrance connected to the water tank. Valve is connected to the tube in which the dye is injected at the mouth from the dye bottle. By varying the discharge, dye in the form of Thread is observed for the stream
lined flow and a wavy form of dye thread is observed in the transient stage from stream lined to turbulent flow and finally the dye is observed in the diffused form when turbulent flow occurs as the discharge is increased.

RANGE OF EXPERIMENTS

1. To determine the Reynolds number & hence the type of flow either laminar or turbulent.
2. To determine upper & lower critical Reynolds numbers and velocities.

SPECIFICATIONS

1. Storage tank with flow steadying arrangements. Tank Size 400 mm x 400 mm x 700 mm
approximately. Storage tank is made up of 18 SWG M.S. sheet with 1.5 mm approx. of F.R.P.
lining internally to resist corrosion and externally are powder coated.
2. Measuring Flask.
3. Dye bottle & capillary tube.
4. Bell mouth entry section.
5. Acrylic tube of 2.5 cm OD & 90 cm length.
6. Suitable stand to mount the acrylic tube.
7. Balancing tank to maintain constant head.
8. Stop clock.
9. Supply tank suitable capacity, 1phase, 230 v FHP motor
10. support stand

INSTRUCTION MANUAL

A manual is supplied which gives details of the apparatus and procedure of experiments along with specimen calculations.

SERVICES REQUIRED

Suitable water supply arrangement.
Floor Space : 3m X 1m.approximately

FCC-02

INTRODUCTION

“EEE”Venturimeter & Orificemeter apparatus is useful for calibration of Venturimeter and orificemeter
consisting of storage Tank of suitable capacity, pump (0.5HP) with Control valves, Pressure tapings,and Rotameter etc. The unit is supplied with one ventuimeter and one orificemeter ,'U' Tube Mercury Manometer, Stop Clock, etc.

SPECIFICATIONS

1. Storage tank :Capacity: - 50 Lts. ( Approx.) Storage tank is made up of 18 SWG M.S. sheet with 1.5 mm approx. of F.R.P.lining internally to r e s i s t
corrosion and externally are powder coated.
2. Monoblock pump : Single phase 1/2 H.P. “ Sharp “ Make ( from Coimbatore) / Kirloskar Make /
equivalent
3. Venturimeter :
Inlet Diameter : 25 mm
Throat Diameter : 14.5 mm
4. Orificemeter : Diameter : 12.5 mm
5. Rotameter : having capacity 250 2500 LPH with calibration certificate to all equipment.

INSTRUCTION MANUAL

A manual is supplied which gives details of the apparatus and procedure of experiments along with sample calculations.

SERVICES REQUIRED

AC. 230 V single phase stabilised supply with earthing connection.
Space required : 2 mtr X 1.5 mtr approx.

FMC-14

INTRODUCTION

Cavitation is most unpleasant hydrodynamic phenomenon, whose harmful effect are both widespread and obvious and seriously handicap many phase of science and engineering. Conversely its basic nature has long been valid in mystery and only recently it is beginning to understand. Cavitation is liquid phenomenon and does not occur under any normal circumstances either in solids or gases. It is seldom observed in concerned field because it normally occurs within closed opaque conduits. But now with the help of this set up demonstration of its direct appearance and measurement of conditions is possible. Thus it is very helpful for better understanding Cavitation.
The test set up works as closed circuit system and uses only above 750 lits of water as a cavitating fluid. Two tanks, one as a sump or delivery tank and another as a pressure tank are provided. The centrifugal pump sucks water. The delivery side of the pump is fitted with a valve for flow variation. A Venturimeter is provided for discharge measurement. The discharge is given to a closed pressure vessel were the water gets pressurized and it passes through the acrylic Venturimeter and the same goes back to the sump tank through suitable pipe line. The acrylic Venturimeter is so designed that the liquid reaches its vapor pressure at a desired discharged of water and Cavitation is initiated at the throat and the pressure at throat is reduced about 620-mm.of hg. (7 to 8 mtrs. of water head).

SPECIFICATIONS

Monoblock 3 phase pump : 3 H.P.
Acrylic Ventury for visuliasation of the cavitation phenomenon -20 mm throat.
Mercury manometer for flow measurement across venturi.
Pressure and Vacuum Gauges .
Gate valve : Brass for water flow control

INSTRUCTION MANUAL

A manual is supplied which gives details of the apparatus and procedure of experiments along with sample calculations.

SERVICES REQUIRED

Suitable water supply arrangement
Suitable drainage arrangement
Space required:
3 m X 1.5 m.approx.

FCC- 2

INTRODUCTION

“EEE”Venturimeter & Orificemeter apparatus is useful for calibration of Venturimeter and orificemeter

RANGE OF EXPERIMENTS

Calibration of Venturimeters.
Calibration of Orificemeters.

SPECIFICATIONS

1. Each line is provided with flow control valve for setting of different flow rates.
2. Pressure tubes of different pipe lines are connected to common manometer through cocks (Without Hg.).
3. Flow control valve at the end of each line assures full running of pipe.
4. Ease of operation and replacement of Venturimeter/Orificemeter.
5. Supporting stand for mounting the pipe line.
6. Venturimeter Inlet Diameter : 25 mm
Throat Diameter : 12.5mm
7. Orifice meter Diameter : 12.5 mm
8. Rotameter 250 to 2500 LPH

INSTRUCTION MANUAL

A manual is supplied which gives details of the apparatus and procedure of experiments along with sample calculations.

SERVICES REQUIRED

AC. 230 V single phase stabilised supply with earthing connection.
Space Required :-
2 mtr X 1.5 mtr approx.

ENQUIRY FORM

Enquiry Form * fields are mandatory
Contact Person *
Company Name
Address
Email *
Country *	Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegowina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Croatia (local name: Hrvatska) Cuba Cyprus Czech Republic Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France France Metropolitan French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Heard and Mc Donald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran (Islamic Republic of) Iraq Ireland Israel Italy Jamaica Japan Jordan Kazakhstan Kenya Kiribati Kuwait Kyrgyzstan Latvia Lebanon Lesotho Liberia Libyan Arab Jamahiriya Liechtenstein Lithuania Luxembourg Macao Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montserrat Morocco Mozambique Myanmar Namibia Nauru Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island North Korea Northern Mariana Islands Norway Oman Pakistan Palau Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Reunion Romania Russian Federation Rwanda Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Seychelles Sierra Leone Singapore Slovakia (Slovak Republic) Slovenia Solomon Islands Somalia South Africa South Korea Spain Sri Lanka St. Helena St. Pierre and Miquelon Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syrian Arab Republic Taiwan Tajikistan Tanzania Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom United States United States Minor Outlying Islands Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Vietnam Virgin Islands (British) Virgin Islands (U.S.) Wallis And Futuna Islands Western Sahara Yemen Yugoslavia Congo, The Democratic Republic Of The Zambia Zimbabwe Other Country Select One
Phone *
Mobile No.
Fax
Subject
Enquiry Details *